Ubiquiti UAP-AC-PRO Wireless AC1750 Access Point

Highlights

  • 3 Dual-Band Antennas, 3 dBi each
  • Max. Power Consumption: 9W
  • Networking Interface: 2 10/100/1000 Ethernet Ports
  • Features auto-sensing 802.3af/802.3at PoE support and can be powered by any of the following: Ubiquiti Networks UniFi Switch 802.3af/802.3at PoE+ compliant switch Ubiquiti Networks Gigabit PoE Adapter (48V, 0.5A)
  • Wi-Fi Standards: 802.11 a/b/g/n/ac

Product Description

UAP-AC-PRO-US (Single Pack U.S. Version) . The Unifi AC Pro AP supports simultaneous dual-band, 3×3 MIMO technology in the 5 and 2.4 GHz radio bands. The Unifi AC Pro AP features the latest Wi-Fi 802.11ac, 3×3 MIMO technology in a refined industrial design and is ideal for deployment of maximum-performance wireless networks. The Unifi AC Pro AP is a gigabit, 802.3af-powered access point suitable for indoor or outdoor use. You can easily replace a standard Unifi AP using the same mounting hardware.

802.11ac PRO Access Point

The UniFi AC Pro AP features the latest Wi-Fi 802.11ac, 3×3 MIMO technology in a refined industrial design and is ideal for deployment of maximum-performance wireless networks.

Up to 5X Faster with Dual-Radio 3×3 11AC MIMO Technology

The UniFi AC Pro AP supports simultaneous dual-band, 3×3 MIMO technology in the 5 and 2.4 GHz radio bands.

Designed for Optimal RF Performance

The newly redesigned UniFi Controller optimizes RF performance

  • Spectral analysis: collects feedback on full 5Ghz and 2.4Ghz channel interference
  • Band steering: Pushes clients to faster interference-free, 5GHz channel
  • Airtime fairness: Minimize problem-client effects on system performance by limiting their airtime access

Versatile Design

The UniFi AC Pro AP is a gigabit, 802.3af-powered access point suitable for indoor or outdoor use.

Scalable Enterprise Wi-Fi Management

The UniFi Controller v4 software is a powerful, enterprise wireless software engine ideal for high-density client deployments requiring low latency and high uptime performance. With its software-based capabilities, the UniFi virtual control plane allows for unlimited scalability under one centralized controller. Remotely access the UniFi Controller to upgrade deployed UniFi APs while in the field

Specifications

Dimensions: 196.7 x 196.7 x 35 mm (7.74 x 7.74 x 1.38″)
Weight: 350 g (12.4 oz); With Mounting Kits: 450 g (15.9 oz)
Networking Interface: (2) 10/100/1000 Ethernet Ports
Port: (1) USB 2.0 Port
Buttons Reset: Power Method Passive Power over Ethernet (48V), 802.3af/802.3at Supported
(Supported Voltage Range: 44 to 57VDC)
Power Supply: UniFi Switch (PoE)

Power Save: Supported
Maximum Power Consumption: 9W
Maximum TX: Power 2.4 GHz 22 dBm; 5 GHz: 22 dBm
Antennas (3) Dual-Band Antennas, 2.4 GHz: 3 dBi, 5 GHz: 3 dBi
Wi-Fi Standards: 802.11 a/b/g/n/ac
Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID Up to 8 per Radio
Mounting Wall/Ceiling (Kits Included)
Operating Temperature: -10 to 70° C (14 to 158° F)
Operating Humidity: 5 to 95% Noncondensing
Certifications: CE, FCC, IC

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *

%d bloggers like this: